Things need to pay attention to when driving Zowell Multi-directional forklift.

1. Fasten the operator's seat belt

Check the seat belt and its latch, if the seat belt has wear or crack, should be replaced.

If you find that the seat belt buckle cannot be fastened, make sure to replace it.

2. Pay close attention to the direction of travel of the forklift

Make sure there are no obstacles in the path of the forklift and on the ground or no objects protruding from the racks in the aisle.

Pay attention to the surroundings at all times and pay attention to the current direction of travel.

Make sure the forklift warning device is activated to warn vehicles and pedestrians in the same work area to avoid them.

3. Drive carefully

Always ensure that the operator is physically located within the operator's area of the cab.

Always ensure that the forklift is under the operator's control.

Always drive at a speed that will safely stop the forklift.

4. Avoid falling or tipping

Inspect the seat belt and its latch and replace it if it is worn or cracked.

If you find that the seat belt latch does not fasten, be sure to replace it.

5. Use the forklift safely

Do not allow any person to stand under or over the forks under any circumstances.

Do not allow others to ride on the forklift.

Before leaving the forklift, you should：

1. park the forklift in the specified area.

2. stop the forklift completely.

3. lower the forks to the ground.

4. Pull out the key or cut off the power switch.